Euromold Connector
Euromold plug-in Tee connector and Euromold plug-in Elbow connector are for Ring Main Unit and light duty Gas Insulated Switchgear. because of the benefits of the silicone insulation, they reduce space of the switchgear cubicle. Furthermore, Euromold Connectors are both plug in type without bolt and T connector with bolt. Euromold Connector are made in Euromold / Nexans in Belgium. To serve the instant demands, we have stock of almost all ratings to be used in Thailand.
Apart from the connectors, we also provide Euromold Bushings for this plug-in application. The bushings are needed by Power Transformer factories.
They are for cable 3.3kV, 7.2kV, 12kV, 22kV and 33kV voltage rating, 200A, 400A, 630A and 1250A.
There are for cable of conductor size 35, 70, 120, 180, 240, 400, 800 square millimeter.
Bolt-on Tee connector are K480TB, K400TB, K440TB. All are Interface C which are commonly used.
Coulping Tee connectors for double cable per phase is also available i.e. K800PB for K480TB
Plug-in Elbow Connector are K400LR and K200LR. The first is Interface B and the latter is Interface A
Lightning arrestor are also avalable 300SA for K430TB, 400PB for K400TB and 800SA for K480TB
Bushings are also here M400AR-1 and M400AT-1 for K400LR, M400AR-3 for K480TB and etc.
below is the table shows the difference of each model.
The illustration below shows the difference between Symetrical connector and Asymetrical connector
Other accessories are also available such as Break out kits for 3-core cable (T-HSBK) , Earthing kits for copper tape shiled cable (KitMT=Roll Spring+Flexible braid+Lugs)
Aparted from this we also sell Nexans/Euromold conventional heat shrink cable terminator both outdoor and indoor, i.e. 24TTGE and 24TTGI for outdoor and indoor respectively
please call us or Line us for stock available and pricing.
<<= ADD MY LINE ID BY QR CODE HERE
Link to Euromold website << click here